All tricks in this blog are only for educational purpose. Learn these tricks only for your knowledge. Please donot try these to harm any one. We will not take any responsibility in any case. All softwares and tools on this site are here for private purposes only and If you want to use a software for business purpose, please purchase it. I do not host many of these tools. I Post links that I have found from numerous Search engines. I will not be responsible for any of harm you will do by using these tools.
Core Center lets you overclockyour system from within WinXP. The soft-ware was a little more convenient than usingthe BIOS setup utility because it didn’trequire a reboot to change system settings.In the end, however, Core Center couldn’tprovide the same performance numbers weachieved using the system BIOS.Before we began overclocking, we need-ed to take some sample numbers. Our3.06GHz P4 managed a 10268 3DMark-2001 SE score. For comparison’s sake, the2.8GHz P4 we tested managed a 103503DMark score when we overclocked it to3.06GHz. PCMark2002 scores were fairlyimpressive. This P4 managed a 7531 CPUscore, but the Memory score was down abit from the previous case study at 6579(although it would improve later). The SATA driveposted a 1224 HDD score.To overclock the system, we opened the Core Center software. We clicked the redarrow on the left side of the interface to get to the overclocking op-tions. To increase theFSB speed, we clicked the radio button next to FSB and used the + and– keys to increase the speed from 133MHz to135MHz. Remember, the P4 uses a quad-pumped FSB, so the increase from133MHz to 135MHz is the same as mov-ing from a 533MHz FSB to a 540MHzFSB. We then clicked the Enter button onthe interface to apply the changes.The bump in FSB speed increased the processor’s clock speed to 3.11GHz.3DMark scores, however, fell to 10099. We upped the clock speed dramatically using the Core Center software. At 145MHz, theCPU was running at a 3.34GHz clockspeed, and we started thinking we just might get this processor above 3.5GHz.3DMark scores rebounded, rising slightly higher than our initial readings at 10277.We increased the FSB speed again to150MHz. This set the processor’s clock speed at 3.45GHz and provided us with a slightly better 10356 3DMark score.Further increases to the FSB speed made the processor unstable and caused 3DMarkto hang. We tried to increase the CPU’s.
Download INTEL 3.06 GHZ PENTIUM 4 & MSI 865PE NEO2-S.
Detail Specification Product Brief CPU Memory Expansion Slot Audio Graphics LAN Rear Panel I/O Connector BIOS Feature Support CD Accessories Hardware Monitor OS Certifications The specification is subject to change without notice. The brand and product names are trademarks of their respective companies. Any configuration other than original product specification is not guaranteed. Chipset Platform – Supports FSB1333/1066/800/533 MHz CPUs- Supports CPU power up to 105W – Supports Dual Channel DDR2 800- Intel® Graphics Media Accelerator X4500,Pixel Shader 4.0, DirectX 10, Max. shared memory 1759MB- EuP Ready- Supports ASRock Instant Boot, Instant Flash,OC DNA, ASRock OC Tuner (Up to 145% CPU frequency increase) – Supports Smart BIOS, Intelligent Energy Saver (Up to 20% CPU Power Saving) – Micro ATX Form Factor: 8.8-in x 6.7-in, 22.4 cm x 17.0 cm- LGA 775 for Intel® CoreTM 2 Extreme / CoreTM 2 Quad /CoreTM 2 Duo / Pentium® Dual Core / Celeron® Dual Core/ Celeron®, supporting Penryn Quad Core Yorkfield and Dual Core Wolfdale processors- Supports FSB1333/1066/800/533 MHz- Supports Hyper-Threading Technology- Supports Untied Overclocking Technology- Supports EM64T CPU- Northbridge: Intel® G41- Southbridge: Intel® ICH7- Dual Channel DDR2 memory technology- 2 x DDR2 DIMM slots- Supports DDR2 800/667/533 non-ECC, un-buffered memory – Max. capacity of system memory: 8GB- 1 x PCI Express x16 slot- 1 x PCI slot- Intel® Graphics Media Accelerator X4500- Pixel Shader 4.0, DirectX 10- Max. shared memory 1759MB- Supports D-Sub with max. resolution up to 2048×1536 @75Hz- 5.1 CH Windows® VistaTM Premium Level HD Audio(Realtek ALC662 Audio Codec)- Atheros® PCIEx1 LAN AR8132L- Speed: 10/100 Ethernet- Supports Wake-On-LANI/O Panel- 1 x PS/2 Mouse Port- 1 x PS/2 Keyboard Port- 1 x Serial Port: COM1- 1 x VGA Port- 4 x Ready-to-Use USB 2.0 Ports- 1 x RJ-45 LAN Port with LED (ACT/LINK LED andSPEED LED)- HD Audio Jack: Line in / Front Speaker / Microphone- 2 x SATAII 3.0 Gb/s connectors (No support for RAIDand “Hot Plug” functions)- 1 x ATA100 IDE connector (supports 2 x IDE devices)- 1 x Print port header- CPU/Chassis FAN connector- 24 pin ATX power connector- 4 pin 12V power connector- Front panel audio connector- 2 x USB 2.0 headers (support 4 USB 2.0 ports)- 8Mb AMI Legal BIOS- Supports “Plug and Play”- ACPI 1.1 Compliance Wake Up Events- SMBIOS 2.3.1 Support- VCCM, NB, VTT Voltage Multi-adjustment- Supports Smart BIOS- Drivers, Utilities, AntiVirus Software (Trial Version)- CPU Temperature Sensing- Chassis Temperature Sensing- CPU Fan Tachometer- Chassis Fan Tachometer- CPU Quiet Fan- Voltage Monitoring: +12V, +5V, +3.3V, Vcore- Microsoft® Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit/ XP / XP 64-bit compliant- FCC, CE- EuP Ready (EuP ready power supply is required)- Quick Installation Guide, Support CD, I/O Shield- ATA 100 Cable (Optional)- 1 x SATA Data Cable (Optional) Intel® G41+ ICH7 Chipsets Unique Feature – ASRock OC Tuner – Intelligent Energy Saver- Instant Boot- ASRock Instant Flash- ASRock OC DNA- Hybrid Booster:- CPU Frequency Stepless Control- ASRock U-COP- Boot Failure Guard (B.F.G.)
Download Intel G41+ ICH7 Chipsets.
There are many other factors to bear in mind when choosing the correct cooling method for your components. When it comes to cooling specific parts of your PC, such as your CPU and graphics card, the fanwill also be attached to a heatsink (known as an HSF—heatsink fan), which is there to help shift as much heataway from the chip in the shortest amount of time. With this in mind, you need to make sure that the HSFs you buyare up to the job of cooling your components, which you can do by finding out their thermal design power (TDP).The TDP is basically the amount of heat energy(in watts) that needs to be removed from a component in order for it to function correctly. This information is usually fairly easy to find with some quick research on the Web, and if you can track down the TDP foryour component, you can then add the most suitable HSF. Intel’s latest chips have a particularly high TDP(often way in excess of 100W), which is why they need a lot more in the way of cooling than AMD’schips. You also need to bear in mind that overclocking these components will push the TDP even higher, so overclockers need to install coolers that can remove well over and above the required TDP. The TDP is likea worst-case scenario, and your chip will be producingless energy most of the time, but you need to make sure that you have the required cooling headroom for the occasions when your PC is running at full tilt. TIM stands for “thermal interface material,” and it’sbasically the gunk that sits between a chip (be it a CPU,GPU, or Northbridge) and the heatsink (or water block)that it’s attached to.So why do you need it? After all, heatsinks are made of metal (one of the best heat conductors available), and CPUs usually have a metal heat spreader attached to them, too. Why do you need anything else? Well, that should be enough in theory, but it relies on both your heatsink and your CPU’s heat spreader having completely flat surfaces to ensure that all of the heat is transferred efficiently.Unfortunately, though, completely flat heatsinks are about as common as polar bears in Texas. With just the two bits of metal touching, you’re not going to shift as much heat as you need.This is where TIM comes in; filling in all the gaps to ensure that there is a larger surface area to transfer the heat, and that as much heat is translated from the chip to the heatsink as possible. TIM is cheap,even for the top quality stuff, such as Arctic Silver 5, sothere’s no excuse not to use it.
Download The Complete Guide to Modding and Custom PC’s.
NVIDIA Quadro Workstation GPU • Full 128- bit floating point precision pipeline • 12- bit subpixel precision • Hardware- accelerated antialiased points and lines • Hardware OpenGL overlay planes • Hardware- accelerated two- sided lighting • Hardware- accelerated clipping planes • Third- generation occlusion culling • 16 textures per pixel • OpenGL quad- buffered stereo (3- pin sync connector) • Hardware- accelerated pixel read- back Next-generation Shading Architecture
• Fully programmable GPU (OpenGL 2.0/ DirectX 9.0c support) • Unlimited long fragment and vertex programs • Looping and subroutines (up to 256 loops per vertex program) • Dynamic flow control • Conditional execution Architecture • x16 PCI Express • 128- bit IEEE floating point precision graphics pipeline • 32- bit floating point per component • 12- bit subpixel precision • Up to 1GB memory • Up to 42.2GB/sec. memory bandwidth • Up to 2.4GB/sec. read back performance
• Unlimited programmability • 3D volumetric texture support • Single- system powerwall High-level Shader Languages • Optimized compilers for Cg, OpenGLSL, and MicrosoftHLSL • OpenGL 2.0 and DirectX 9.0c support • Open source compiler High-resolution Antialiasing • Up to 32x full- scene antialiasing (FSAA), at resolutions up to 1920 x 1200 • 12- bit subpixel sampling precision enhances AA quality • Rotated- grid FSAA significantly increases color accuracy and visual quality for edges, while maintaining performance Memory • High- speed memory (up to 1GB) • Advanced lossless compression algorithms (color and Z data) Unified Driver Architecture • Single driver supports all products Operating Systems • Microsoft Windows® XP, 2000, NT® • Linux—Full OpenGL impleamentation, complete with NVIDIA and ARB extensions (complete XFree 86 drivers) • AMD64, Intel EM64T NVIDIA® nView™ Architecture • Advanced multi- display desktop and application management seamlessly integrated into Microsoft Windows • Dual DVI output—drives two independent digital displays at 1600 x 1200, or one at up to 3840 x 24005 • Dual- link TMDS—drives up to two digital displays at 3840 x 2400 @ 24Hz simultaneously3,6 • 400MHz DACs—two analog displays up to 2048 x 1536 @ 85Hz each • OpenGL stereo support for resolutions up to 3840 x 24007 Professional Certifications CAD • Ansys • Autodesk Architectural Desktop, AutoCAD, AutoStudio, DesignStudio, Inventor, Lightscape, Mechanical Desktop, Showcase, VIZ • AVEVA: PDMS • Bentley Microstation • Co|Create OneSpace • Dassault CATIA, SolidWorks • ESRI ArcGIS • ICEM Surf • MSC.Nastran, MSC.Patran • PTC Pro/ENGINEER Wildfire, 3Dpaint, CDRS • UGS NX Series, I- deas, SolidEdge, Unigraphics, SDRC • and many more… Digital Content Creation (DCC) • Autodesk Media and Entertainment 3ds Max, Maya, MotionBuilder, VIZ, Smoke, Lustre • NewTek Lightwave 3D • Side Effects Houdini • Softimage|XSI • and many more… Video/Broadcast Applications • Adobe Premiere, After Effects, Macromedia Suite • Apple Shake • Avid Media Composer Adrenaline HD, NewsCutter, Xpress Family, DS Nitris, Liquid Family, Studio • Pinnacle Studio, and Liquid Edition • Autodesk Media and Entertainment Fire, Smoke, Inferno, Flame, Flint, Toxik, Combustion • NewTek, TriCaster Energy.
Download NVIDIA Quadro Technical Specifications.
The new high end NVIDIA Quadro FX 3000 graphics card offers ultimate workstation feature-set and performance. With programmable shaders, dual DVI-I display support and the new nView software, the Quadro FX 3000 is the most powerful and robust workstation graphics product on the market. The Quadro FX 3000 represents a revolutionary combination of performance and features, including 256 MB DDR2 memory, nfiniteFX II programmable graphics pipeline and performance optimized OpenGL and DirectX drivers. Features also include a unified memory architecture, which dynamically allocates memory between graphics subsystems, Lightspeed Memory Architecture (LMA) II, which optimally load balances across NVIDIA’s patented crossbar memory controller, resulting in maximum memory bandwidth utilization. The Quadro FX 3000 Graphics Controller is a perfect solution for the high end CAD and professional DCC user communities requiring breakthrough application performance. Key Benefits 256 MB of DDR graphics memory Hardware overlays Hardware accelerated antialiased points and lines Two-sided lighting Occlusion culling Advanced full-scene antialiasing OpenGL quad-buffered stereo Advanced high-level shading language support for both OpenGL and DirectX Optimized and certified for OpenGL1.3 5 and DirectX. 9.08 Multi-display productivity Performance The Quadro FX 3000 is optimized for High End 3D, CAD and professional DCC configurations. Compatibility The Quadro FX 3000 is supported on the following HP Personal Workstations: xw4100, xw6000, xw8000. Service and Support The NVIDIA Quadro FX 3000 has a one-year limited warranty or the remainder of the warranty of the HP product in which it is installed. Technical support is available seven days a week, 24 hours a day by phone, as well as online support forums. Parts and labor are available on-site within the next business day. Telephone support is available for parts diagnosis and installation. Certain restrictions and exclusions apply.
Download NVIDIA Quadro FX3000 Graphics Controller.
NVIDIA Quadro NVS 280 PCI Graphics – HP Business Desktops DY599A NVIDIA Quadro NVS 280 PCI Graphics – HP Workstations AA932A HP DMS59 DVI Dual-head Connector Cable DL139A Introduction The NVIDIA Quadro NVS 280 PCI Graphics Controller is a low profile graphics card for professional 2D graphics, able to support dual monitors. Easily installed with a setup wizard, this controller integrates seamlessly with the Microsoft® Windows® environment. NVIDIA’s multi-display software, nView, lets users fully operate on dual displays and create up to 32 individual desktops. The NVIDIA Quadro NVS 280 PCI Graphics Controller delivers workstation graphics productivity with stability, high image quality, and fast performance. The NVIDIA Quadro NVS 280 PCI Graphics Controller is ideal for desktop users such as telesales-center representatives or advanced Excel spreadsheet analysts who require the flexibility of dual-monitor displays. If you are using a workstation, it is tested for compatibility with all major financial, non-linear editing (NLE), and electronic design automation (EDA) applications. It provides great flexibility if you need support for dual analog or digital displays. NOTE: Graphics cards use part of the total system memory (RAM) for graphics performance. System memory dedicated to graphics performance is not available for other use by other programs Key Benefits Permits work to be viewed on two monitors with nView multi-display software Dual 350-MHz RAMDACs deliver crystal-clear images Dual TMDS transmitters support the latest flat-panel displays Single high-density connector supports dual analog or digital displays Unified driver architecture (UDA) provides easy installation and manageability DirectX 9.0 support in hardware for optimal performance in DX9 applications OpenGL 1.5 support in hardware for optimal performance with OpenGL applications Performance The NVIDIA Quadro NVS 280 PCI Graphics Card is optimized for professional 2D Workstation and HPBusiness Desktop PC configurations. It comes with enhanced, customized multi-display drivers, including nView multi-display desktop and application management software. Compatibility The NVIDIA Quadro NVS 280 PCI Graphics Controller (DY599A) is compatible with the HP Business Desktop dx5150, dx7300, dc5100, dc5700,dc7600 and dc7700 series PCs and the rp5000 and rp5700 Point of Sale Systems.
Download NVIDIA Quadro NVS 280 PCI Graphics Card.
E1 motherboard BIOS update „WN STD 02/05“ New features and improvements • There is a NEW POWER UP BEHAVIOUR implemented: After power on, the BEETLE remains 4 seconds OFF! After 4s the power supply starts to provide all devices with energy and therefore fan starts, power LED turns on, hard disk spins up, e. t. c. This feature was implemented to ensure save detection of USB devices after power up. It’s a work-around recommended by Intel! There will be no delay, if BEETLE power supply was not switched off (on return from shutdown, hibernation or stand by mode). • Now, setup parameters (CMOS data) will remain, if update is done with Phoenix’ WinPhlash® update procedure for Windows. Like it is with DOS based update. • New video BIOS VB321R build 570 included in actual package. Improved support of VESA standard avoids some known Linux trouble of previous releases. • New BIOS SETUP parameter is introduced in [I/O device configuration] section. You may change resources of RS232 onboard port COM1: / COM2: • Default parameter of BIOS SETUP changed: “PS/2 mouse == ENABLED” and “Touch Screen Routing” == “TFT Touch to COM2″. • Under some very certain circumstances PS/2 keyboard could not be accessed if PS/2 mouse was disabled in BIOS setup. This was seen with BIOS 01/01 and is improved with actual BIOS (02/02 and higher). • Improved boot behaviour of USB mass storage devices (CF cards, USB FD, …) • Improved reset behaviour of USB peripheral devices (barcode reader, …) • Improved hardware monitoring for -12V voltage and fan speed. • Advanced system initialisation after replacing on board battery, avoiding spurious hang up during P.O.S.T. Extra tool INIT0101.EXE not needed anymore. • In our test labs we could see, that – under a system shutdown initiated by Windows XP, did not switch off the BEETLE. This error is solved now. • While system installation Windows XP embedded sporadically showed a blue screen. This was seen with BIOS 01/01 while first boot agent installed onboard COM3/4 driver ITE.SYS and is solved now. See also chapter Windows enumeration of COM ports … • DMI data will be preserved if BIOS is updated from DOS BIOS (projects). • A new DMI data structure according to international standards is implemented in actual BIOS release. Therefore, DMI data needs to be reorganized while BIOS update! See chapter DMI data … Known problems or restrictions • An already installed plug and play operating system likeWindows XP, will redetect onboard COM3/4 ports as COM5/6 or higher after BIOS update. See also chapter Windows enumeration of COM ports … • WinPhlash® based BIOS update for Windows is not provided.
Download E1 motherboard BIOS update WN STD 02/05.
? This release is not valid for D2 basic motherboard !? THIS RELEASE IS NEEDED, IF YOU WANT TO PERFORM AUTOMATIC UPDATE OF BEETLE BIOS RELEASES OVERINTERNET. The in future (higher than 0B/22) BIOS releases of D2 STD BIOS will also be available as an BEETLE VIEW update package, provided in www – you need to update to this release before! ? Some new features of the update procedure (UPBIOS.EXE) rel. 3.1:If any of these advanced features is wanted, you need to adapt the update floppy disk! See chapter “How to use flash tool UPBIOS.EXE” for further information about options. The main feature of this release is the automatic start of BIOS update after bootup of floppy! You are not prompted to confirm flash update, but you may abort the automatic procedure, when asked.It provides output to external line displays for BEETLE with or without VGA adapter.Another new feature of update procedure is the support of CMOS setup data save/restore. You can set setup options as wanted, than create animage file of BIOS setup data and after easily write the certain settings from image file to CMOS memory while BIOS flash update procedure! ? The binary floppy disk imageD2*DD.BIN, is made for Linux. Usecommand with default parameters, to write image to target floppy. ? The floppy disk image D2*IMG.EXE, is made for Windows only.The WinImage executable does not run under DOS! Use the D2*ARJ.EXE self extractor, if flash disk needs to be created with DOS . ? The self extracting ARJ archives (D2*ARJ.EXE), are basicly made for DOS.But they do extract all data under Windows as well.The UPDATE archive extracts files directly to a floppy in drive A: The CRISIS archive extracts files to folder C:\CRISIS Note, you need to rename the archive file to “8.3 format” before running iton a DOS BEETLE. It is good practise to store and run the ARJ self extractor in root folder, because it is a DOS based tool which does not support long folder pathes !!!You alyways need to prepare the update disk before: run “format a: /s”. ? If there is a power fail during programming or BIOS update failed by other reasons, use the CRISIS DISK for recovery. To be found in the same DOWNLOAD.ZIP file.If Windows is your operating system, you need to use the crisis disk image D2CRISIS*IMG.EXE to create a crisis boot disk! DOS based systems require the ARJ self extracting archive, which The extracts to folder “c:\crisis”. Use “C:\CRISIS\CRISDISK.BAT” to build a crisis disk. You do need to boot up a DOS system – this can not be done in a Windows command box! Since a certain minimal, non standard DOS(without screen output) is needed for crisis recovery, do not use DOS commands “format” or “sys”. Detailed information you also find in README.TXT in archives / image files.
Download BIOS update/crisis disk for BEETLE with i815 standard motherboard release WN STD 0B/22.
D2 motherboard BIOS update 43/15 file !!!If Windows is your operating system, you need to use the crisis disk imageD2CRISIS*IMG.EXE to create a crisis boot disk !!!.DOS based systems require C:\CRISIS\CRISDISK.BAT from ARJ archive to build a crisis disk.If using “Crisdisk.Bat”, you need to boot up a DOS system – this can not be done in a Windows command box! Since a certain minimal, non standard DOS(without screen output) is needed for crisis recovery, do not use DOS commands “format” or “sys” ! After the crisis boot disk is prepared, run theARJ self extracting archiv to copy all files to floppy. Detailed information you also find in README.TXT in archives / image files.If a flash update from a BEETLE card (SRAM memory cards) is wanted,you first need to make the MC bootable (DOS), than use self extracing archive,to create the flash update disk.DMI data will not be initialized while flash update, like some previous BIOS releases did. Therefore BEETLE serial numbers and other entries will remain!When older BIOS releases (before 07/16) need to be flashed,you need the firmware hub patch. This tool is placed in the same download area, where you found this BIOS update. See expired releases “Additional FIRMWARE HUB PATHCH for expired BIOS releases”: This information is also placed in README_3.TXT on floppy!!General:”Upbios 3.x” is designed for easy support of Phoenix(R) “phlash.exe” flash tool. Update procedure is running automatically, configurable via”upbios.cfg” configuration file and via arguments from commandline. All messages are minimized and optimized for use of 2×20 lines display. No need of keyboardinput, but abort of procedure is possible. Beep support is provided for abort option (one double beep), successful operation (two double beeps),error messages (three double beeps). UPBIOS.EXE is used for flash update of POS BIOS andalso STD BIOS !Options are selectable from command line. It might be useful to create an “autoexec.bat” providing the complete commandline. Configuration is done via “upbios.cfg”configuration file. Options:Calling syntax: upbios [com3] [cdump] [cload] [t] [q] [p] [m n][over] [anyway] Any options may be mixed, but if cdump is selected,no Bios update will be done.Note: Options from command line will override appropriate keyword properties in “upbios.cfg”. upbios: Bios update using “upbios.cfg” com3: if BA6x on COM3 is available, screen output will be redirected to COM3. cdump: make a CMOS-copy of actual system into “cmosdump.img”. No Bios update will be done. cload:Before Bios update, CMOS of actual system will be loaded from”cmosdump.img” testmode for debugging problems only, no Bios update will be done. quick mode is waiting between 2-line-messages and beeps will be overrun.
Download D2 motherboard BIOS update 43/15.
Recommended for you
Powered by | Design by Rahul
