All tricks in this blog are only for educational purpose. Learn these tricks only for your knowledge. Please donot try these to harm any one. We will not take any responsibility in any case. All softwares and tools on this site are here for private purposes only and If you want to use a software for business purpose, please purchase it. I do not host many of these tools. I Post links that I have found from numerous Search engines. I will not be responsible for any of harm you will do by using these tools.
About this Guidebook I wrote the first OS X Guide back in April of 2001, and it ran about 12 pages; this version, at well over 70pages, is basically completely new from the ground up. The Solutions Guidebook is not intended as astep-by-step primer for using OS X. To get the most from this guide, you should already have spent sometime becoming familiar with the system. If you are brand new to using OS X, there are some links in the Online Resources section that provide excellent “getting started” advice. Read those, spend some time with your machine, and then revisit this guide.In general, if you read a hint and it seems to be too difficult for your current level of OS X knowledge,mark it and return after you’re more comfortable with the system. No need rushing into a hint that you’re not fully ready to implement yet. Although 99% of the hints in this document are completely harmless, afew could potentially cause system damage if implemented incorrectly.Which brings us to the World’s Largest Disclaimer … what you do to your machine is solely your responsibility! Always make sure you have a good backup, and double-check what you’re about to dobefore it becomes what you can’t undo. I cannot guarantee the safety of anything you choose to implement from this guide, so make sure you’ve got a good backup before you start.The hints and tips in this guidebook have not necessarily all been validated by others. To the best of my knowledge, these tips should work on systems running Mac OS X 10.1 or newer, US edition. No testinghas been done on international versions of OS X, but most of this guide should apply with only mildchanges (substituting your language for “English.lproj”, for example).With that warning stated, most everything in this guidebook is in either in use on my own system or was tested there at some point, and I have not experienced any problems as a result of implementing any ofthese tips. But I do keep a very current backup at all times.This guidebook makes relatively extensive use of colors as a reading aid. I’ve tried to follow a consistent convention throughout the guide, but may have lost track in a few places. What you should see are: Large bold green Chapter titles Bold blue Hint titles and sub-headings Medium orange Initial references to third-party applications Subtle blue-gray Website addresses Monospace medium blue Command line user input Monospace red Command line output 1.1u About new versions of the guidebook Version 1.1 is the first major revision of the guidebook. All the graphics have been replaced with higher quality images, and the master document was transferred from Apple Works to Word v.X. There are also new and updated hints. If you’ve read a previous version of the guide, you can scan for new hints by looking for 1.1n at the start of each hint. Updated hints (and text) are indicated by 1.1u in the same location. Future revisions will follow the same strategy, but with (obviously) higher version numbers.
Download The Mac OS X Solutions Guidebook.
This is a technical introduction to Mac OS X, mainly targeted to experienced UNIX users for whom OS X is at least relatively new Some emphasis on comparisons with Free BSDI’m assuming basic familiarity with operating system design Where I’m coming from:UNIX user and some-time admin since 1990Full-time UNIX admin since 1995NeXTstep user and admin since 1991This presentation covers primarily Mac OS X 10.3.5 (Darwin 7.5) Opening Remarks This presentation Copyright ? 2003-2004 Leon Towns-von Stauber. All rights reserved.Trademark notices Apple ?, Mac?, Macintosh?, Mac OS?, Aqua?, Finder™, Quartz™,Cocoa?, Carbon?, Apple Script ?, Rendezvous™, Panther™, and other terms are trademarks of Apple Computer: The Early Years The NeXT Years Apple Redux History The history of Mac OS X is closely intertwined with that of Steve Jobs 1975 Steve Jobs co-founds Apple Computer1984The Macintosh is released1985Jobs leaves Apple Computer History Apple: The Early Years 71985 Jobs founds NeXT Computer Avadis (”Avie”) Tevanian, co-developer of Mach, leads software engineering efforts Jon Rubinstein heads hardware development 1988 Next Step 0.8 NeXT Computer 1989 Next Step 1.0 History The NeXT Years 101994 NEXSTEP 3.3HP PARISC support added Open Step API specification created (in collaboration with Sun)1995OPENSTEP/Mach 4.0Sun SPARC support added 1996 OPENSTEP/ Mach 4.2 NeXT purchased by Apple Rescue attempt for both NeXT and Apple operating systems Jobs returns to Apple as “advisor” History The NeXT Years 111997Jobs made “interim” CEO of Apple Avie Tevanian leadssoftware engineering Jon Rubinstein leads hardware engineering Rhapsody DR1Support for Power PC and x861999Mac OS X Server 1.0Support for PPC only Graphical interface based on classic Mac GUI Darwin Mac OS X DP1, DP2 History Apple Redux 122000 Aqua graphical interface demonstrated Mac OS X Public Beta2001Mac OS X 10.0, 10.12002Jordan Hubbard (of Free BSD Project) becomes Darwin project manager Mac OS X 10.2 (Jaguar)2003Mac OS X 10.3 (Panther)2005Mac OS X 10.4 (Tiger) History Apple Redux 13 Answers Ancestry Operating System Products The Structure of Mac OS X What Is It? It’s an elephant mean, it’s like the elephant in the Chinese/Indian parable of the blindmen, perceived as different things depending on the approach What Is It? Answers.
Download Mac OS X An Introduction for UNIX Users.
Compatibility • Xcode Tools 2.4.1 is a full release of the Xcode development tools suite. It requires Mac OS X v10.4.xand is able to upgrade previous installations of Xcode Tools 1.x and 2.x releases.• Xcode 2.4.1 supports development for Mac OS X 10.2 (Jaguar), Mac OS X 10.3 (Panther), or Mac OS X10.4 (Tiger) or Universal binaries for Power PC and Intelarchitectures on Mac OS X 10.4 using Mac OS XSDK support. Development for Mac OS X 10.2 requires downloading and installing the separate 10.2.8SDK package available from the ADC website.• The Xcode project file format and extension changed for Xcode 2.1 and later. See the productdocumentation for more information. Changes in this release • Selected fixes were made in the Xcode IDE, cctools, debugger, and compiler. • CHUD has been updated to version 4.4.3. CHUD also releases independent from the Xcode Toolsreleases. Current versions of CHUD can be found at: http://developer.apple.com/tools/download/ • The 10.3.9 and 10.4u SDK’s have been updated. Known issues: Commonly-reported issues known in this release • Spaces inproject path item: Any build setting that contains a path (or includes another build settingthat resolves to a path) must be enclosed in double quotes if the path is likely to contain a spacecharacter. Xcode will handle the quoted value correctly, but will fail if an unquoted value resolves to apath that includes a space.• For build settings that do not have explicit per-architecture versions, you can define the explicitly-supported build setting in terms of another, per-architecture setting which you define manually. Forexample, to define the Other Linker Flags setting using a mix of architecture-independent andarchitecture-dependent settings, you can configure your build settings with the following definitions:OTHER_LDFLAGS = -flag1 -flag2 $(OTHER_LDFLAGS_$(CURRENT_ARCH))OTHER_LDFLAGS_ppc = -ppc_specific_flagOTHER_LDFLAGS_i386 = -intel_specific_flag• Referencing files and folders when a symlink is in the path: ?X code tracks symlinks (like/usr/lib/libz.a). However, there is a regression with references to files and folders where a symlink exists anywhere but the last path component. Symlinks like /tmp/ (which points to /private/tmp/) are handled properly. The biggest impact is to files and folders on statically mounted networkvolumes(dynamically mounted network volumes are not affected). The only workarounds are to either only use absolute paths for references that are affected or to move such files to locally mounted or dynamically mounted network volumes.• Limitations When importing Code Warrior 10 projects: ?Xcode 2.3 and later don’t recognize the new optional text based project format available in Code Warrior Development Studio for Mac OS v10.• Shared libraries window bugs?: You are unable to change the load level of libraries shown in the Shared libraries window.• Setting breakpoints in #included files that aren’t members of a target: ?If Xcode is choosing the wrong location for your breakpoint, you can either edit the location column in the breakpoint window with the correct executable/dylib/framework/Zero Link file or add the file to the target with a ‘Copy Headers’ build phase.• Setting breakpoints in dylib C++ Templates using DWARF?:
Download Xcode Tools 2.4.1 For Mac OS X version 10.4.x (Tiger).
About This Guide9 Target Audience9 What’s New in Mac OS X Version 10.410 What’s in This Guide11 Using This Guide11 Using Onscreen Help 11 Mac Help 12 The Mac OS X Server Suite 13 Getting Documentation Updates13 Getting Additional Information 14 Acknowledgments Chapter 1 15 Introducing Mac OS X Security Architecture 16 Security Architectural Overview 16 UNIX Infrastructure 16 Access Permissions16 Security Framework 17 Layered Security Defense 18 Built-In Security Services 18 Keychain Services 18 Secure Transport Services18Certificate, Key, and Trust Services 18 Authorization Services19 Smart Card Services 19 Authorization versus Authentication Chapter 2 21 Installing Mac OS X 21 System Installation Overview 21 Disabling the Open Firmware Password 22 Installing from CD or DVD 23 Installing from the Network 23 Restoring from Preconfigured Disk Images 23 Initializing System Setup 23 Using Setup Assistant 24 Creating Initial System Accounts 25 Setting Correct Time Settings25 Updating System Software26Updating from an Internal Software Update Server 27 Updating from Internet-Based Software Update Servers 27 Updating Manually from Installer Packages 28 Verifying the Integrity of Software 28 Repairing Disk Permissions 29 Kinds of Permissions 29 POSIX Permissions Overview 29 ACL Permissions Overview30Using Disk Utility to Repair Disk Permissions Chapter 3 31 Protecting Hardware and Securing Global System Settings 31 Protecting Hardware 32 Disabling Hardware 33 Removing Mac OS 933Using the Command Line to Remove Mac OS 934Running Mac OS 9 from a CD or DVD 34 Running Mac OS 9 from a Disc Image 35 Securing System Startup 36 Using the Open Firmware Password Application 37 Configuring Open Firmware Settings 38 Using Command-Line Tools to Secure Startup 38 Requiring a Password for Single-User Mode 39 Configuring Access Warnings 39 Enabling Access Warnings for the Login Window 40 Enabling Access Warnings for the Command Line.
Download Mac OS X Security Configuration For Version 10.4.
Welcome to the TU-Delft standard-Mac, a few things will briefly be explained in this document.Note that this document is only valid for OS X 10.4 Tiger. Check for the latest version of this document here. (www.mac.tudelft.nl)For information about Leopard, please look here.LoginFrom now on you are supposed to log on to your Mac with your Net ID and Password. The NetID is a standard user-account without administrative rights on your Mac. If you want to install up-dates or other software, you should authenticate with an administrative account like local adminor your former local admin-account when asked. Some software requires you to log on with an administrative account.The first time you log on with your NetID your Mac has to be wired to the network. After a successful log on you can log on at home or via wireless a number of times with your NetID with so called ?cached credentials?.NetID and (Keychain-)Password When you change your password on your Mac, your key chain-password is automatically changed to your new NetID password.However, if you change your NetID-password on the NetID-site your Keychain-password is notchanged. To make your key chain-password the same as your NetID-password do the following.Hereby the old key chain-password is your old NetID-password.Remember that when you change your NetID-password, you also have to change the passwordin your mail-application (Mail or Entourage).If you use VPN, Webprint or Wireless Network, you also have to change your password there.See the appropriate sections in the manuals at www.mac.tudelft.nl.Home Folder When you log in with your NetID and Password, you get a local home folder, marked with a symbol of a house. If you are wired to the network, a home-folder on the network will be mounted on your desktop, this one is represented by a small globe.Everything your put on your network home-folder will be backed up every day, the local home-folder will not. You can use arRsync (see Standard Software below) to synchronise folders from your local home-folder (source) tothe network home-folder (destination). For a simple manual of arRsync look here.?Forbidden? characters in Filenames When saving files or folders on the (Windows-based)network, avoid the following characters since Windows doesn’t support them: * . ” / \ [ ] : ; | = , see also wikipedia.Don’t use these ‘forbidden characters’ for file- and folder-names on your network-home and group folders. On your local home-folder there is no problem in using them. However if you plan to synchronise these files or folders to the network, the problem will occur and your files will not be synchronised.
Download Standard Mac OS X 10.4 (Tiger) Image for TU Delft.
Welcome to Tiger Mac OS X puts power at your fingertips with Spotlight searching, Dashboard widgets, custom web news, and four-way video conferencing. Spotlight Find anything, anywhere, anytime. Instantly.Dashboard Instant access to a new kind of application called widgets.iChat AV Video conference with up to three other people.Safari RSS Scan the latest news, information, and articles from the Internet. Automator Automate tasks with point-and-click simplicity. Spotlight Find anything, anytime on your computer as quickly as you can type. Search your entiresystem from anywhere to find documents, email, contacts, calendars, music, movies,photos, bookmarks, and applications. To find something, click the Spotlight icon, then type a few letters or words.Click to view a slide show of your images.The Spotlight window shows all the search results in groups.Click to show or hide a group of items.The Spotlight menu shows the top 20 items you have opened recently. Click an item to open it. Organized results To view all the results of your search, choose Show All in the Spotlight menu to open the Spotlight window. You can group items, sort them, and limit the results. You can preview images and see additional information about items.Click to select the way you want to group the results.Click to view additional information about an item.Click to group, sort, or limit search results.This is the meta data that Spotlight uses to search for this image. Customize Spotlight Use Spotlight preferences to select and prioritize the types of items you want to search for. If youdon’t want to search certain folders or disks,click Privacy and then select them.Drag items to prioritize search results. Click to deselect items you don’t want displayed.Choose a shortcut to show the Spotlight search field. Spotlight… Everywhere You’ll find Spotlight throughout Mac OS X Tiger, including the Finder, System Preferences, Mail, Address Book, and elsewhere. You can also save search criteria to create a Smart Folder that updates its contents automatically each time you open it. Type a few letters or words to search your files.Click a Smart Folder to see the current contents or edit its search criteria.
Download Welcome to Mac OS X v10.4 Tiger (Manual).
Sources of Information If you are new to the world of Linux, there are a number of resources to explore and become familiar with. Having access to the Internet is helpful, but not essential. Linux Documentation Project guides The Linux Documentation Project is a group of volunteers who have worked to produce books (guides), HOWTO documents, and manual pages on topics ranging from installation to kernel programming. The LDP works include: Linux Installation and Getting Started By Matt Welsh, et al. This bookdescribes how to obtain, install, and use Linux. It includes an introductory Unix tutorial and information on systems administration, the X Window System, and networking. LinuxSystem Administrators Guide By Lars Wirzenius and Joanna Oja. This book is a guide to general Linux system administration and covers topics such as creating and configuring users, performing system backups, configuration of major software packages, and installing and upgrading software. Linux System Adminstration Made Easy By Steve Frampton. This book describes day?to?day administration and maintenance issues of relevance to Linux users. Linux Programmers Guide By B. Scott Burkett, Sven Goldt, John D. Harper, Sven van der Meer, and Matt Welsh. This book covers topics of interest to people who wish to develop application software for Linux. The Linux Kernel By David A. Rusling. This book provides an introduction to the Linux Kernel, how it is constructed, and how it works. Take a tour of your kernel. The Linux Kernel Module Programming Guide By Ori Pomerantz. This guide explains how to write Linux kernel modules. More manuals are in development. For more information about the LDP you should consult their World Wide Web server at http://www.linuxdoc.org/ or one of its many mirrors. HOW TO documents The Linux HOW TOs are a comprehensive series of papers detailing various aspects of the system such as installation and configuration of the X Window System software, or how to write in assembly language programming under Linux. These are generally located in the HOWTO subdirectory of the FTP sites listed.
Download Linux Network Administrators Guide.
The Command Line Interface q Windoze-like GUI’s are exist, but we will not discuss them.r In the past year or so, both Gnome and KDE have become excellent desktops. q The shell is the program that you interact with. It is between you and the UNIX/Linux kernel. It uses a command line interface. There are different shells, but we will use bash, which stands for “Bourne again shell.” r One of the original shells was written by Steve Bourne of AT&T Bell Labs. It was named sh q The shell maintains an idea of your present working directory. This distinguishes it from Windoze-like interfaces. q Everything is customisable.q The default bash prompt is: [you@faraday pwd]$ _ where you is your login name, faraday is the name of the computer,and pwd is name of your present working directory: we will discuss directory names further in Module 2. When you first log in, your present workingdirectory is called your home directory, and typically has the same name as your login. r Throughout these documents, the underscore _ represents the cursor, waiting for you to type something. q You enter a command by typing its name and pressing Enter. In the early days the input/output device was a teletype and many of the geeks were not good typists, so command names are often very short. q Getting the date and time looks like: [you@faraday pwd]$ dateThu Apr 25 13:50:51 EDT 2002[you@faraday pwd]$ _ Note in the above example that the shell prompt is shown after the command has executed, so you may enter another command. Logging Out q To log out, you just need to exit the shell. Type: [you@faraday pwd]$ exit q Alternatively, you can give the shell an “end of file” command, which tells it that the input is over. On a keyboard you send an end of file by simultaneously holding down the Ctrl key and the letter d. In documentation, the following forms are commonly used to indicate this sequence: r Ctrl+D: note that despite the notation it is a lower-case d.r ^dr C-d Command Syntax q Most commands take arguments r Some commands require themr For example, echo simply displays its arguments: [you@faraday pwd]$ echo[you@faraday pwd]$ echo hi there hi there[you@faraday pwd]$ _ q UNIX/Linux is case-sensitive, including commands: [you@faraday pwd]$ echo whisperwhisper[you@faraday pwd]$ ECHO SHOUT bash: ECHO: command not found[you@faraday pwd]$ _ q Many commands have options, which begin with a hyphen – or double hypens –. Options are given immediately after the name of the command and before any arguments. For example, echo has an option -n which means donot output the trailing newline. [you@faraday pwd]$ echo -n hi therehi there[you@faraday pwd]$ _.
Download Learning About UNIX-GNU/Linux.
The eServer Open Power, p5, and i5 systems introduce many options for partitioning, virtual or native devices, and consoles. All three versions of the system use the same kernel and have many of the same options available, depending on the system configuration.If you are using a non-partitioned Open Power or p5 system, you do not need any pre-installation setup. For systems using the HVSI serial console, hook up your console to the T2 serial port.If using a partitioned system, whether Open Power, p5, or i5, the steps to create the partition and start the installation are largely the same. You should create the partition at the HMC and assign some CPU and memory resources, as well as SCSI and Ethernet resources, which can be either virtual or native.The HMC create partition wizard steps you through the creation.For more information on creating the partition, refer to IBM’s Info center article on Configuring Linux logical partitions available online at: http://publib.boulder.ibm.com/infocenter/eserver/v1r2s/en_US/index.htm?info/iphbi/iphbiconfig.htm Note that due to the length of this URL, it has been broken into two lines.If you are using virtual SCSI resources, rather than native SCSI, you must configure a ’link’ to the virtual SCSI serving partition, and then configure the virtual SCSI serving partition itself. You create a ’link’ between the virtual SCSI client and server slots using the HMC. You can configure a virtual SCSI server on either AIX or i5/OS, depending on which model and options you have.For more information on these topics, refer to IBM’s Info center article, Creating a Linux logical partition using i5/OS virtual I/O resources available online at: http://publib.boulder.ibm.com/infocenter/eserver/v1r2s/en_US/index.htm?info/iphbl/iphblioserverpartition.htm Note that due to the length of this URL, it has been broken into two lines. Note Additional Information on virtualization eServer i5 and p5 can be found in the RedbooksSG24-6388-00 and SG24-7940-00, Linux on IBM eServer i5 Implementation Guide and Introduction to Advanced POWER Virtualization on IBM eServer p5 Servers. These can be accessed fromhttp://www.redbooks.ibm.com/ and searching on the book number. Once you have your system configured, you need to Activate from the HMC or power it on. Depending on what type of install you are doing, you may need to configure SMS to correctly boot the system into the installation program. 1.3. Preparation for iSeries The installation process assumes basic familiarity with the IBM iSeries platform and makes reference to IBM’s Configuring Linux in a Guest Partition. In general, this section assumes that you have read the Configuring Linux in a Guest Partition document(http://publib.boulder.ibm.com/iseries/v5r2/ic2924/info/rzalm/rzalmlinuxkickoff.htm) in its entirety. Tip Additional information on the iSeries can be found online at: http://www-1.ibm.com/servers/eserver/iseries/linux/ To prepare your iSeries system for installation, follow the instructions in the Planning to run Linux on a logical partition and Creating a logical partition to run Linux sections of the Configuring Linux in a Guest Partition document. Consult your OS/400 command documentation for information on configuring the OS/400 facilities(http://publib.boulder.ibm.com/iseries/v5r2/ic2924/info/rbam6/rbam6clmain.htm).
Download Red Hat Enterprise Linux 4 Installation Guide for the IBM.
Recommended for you
Powered by | Design by Rahul
